1. The main box rod of the power press cannot be hit with heavy objects.
2. The connection between the main screw and the slider can not be cleaned, nor can the lubricant record be changed.
3. The transmission tape should conform to the grooved type of the pulley, and the tightness should be adjusted well.
4. The position of the upper and lower bumps and the limit plate needs to be adjusted and tightened.
5. When the motor is working, no unauthorized person can operate it.
6. It is necessary to ensure that the oil passage of the power press machine is smooth.
7. When the equipment is hot pressed, there must be a baffle to avoid hurting people.
8. After the hydraulic mechanism is turned on, the oil pump needs to run for a period of time before it can be used normally.
9. If the press is suspended, the hydraulic switch needs to be turned off.
10. When the flywheel of the power press is working, it is not allowed to perform all work such as installation.
11. Before starting, check the cushion of the hammer head, whether the screw is loose.
